24小时服务热线
18101382572
密封的取样器CHEM
技术规格:
储罐压力:0,3
bar, 4,4 psi
单位高度:800 mm
重量:5.3 kg
卷尺长度:30m,
100ft
取样瓶:0.5L
全氟醚橡胶垫片适用于任何液体
材质:不锈钢AISI 316, PTFE, PVDF,
FFKM
连接在2英寸的紧凑的阀门采样期间没有气体释放
典型的样品
适用于低或高粘性液体
The
HH10/Sampler GTX CHEM 30m/100ft is dedicated to applications where closed
sampling is required and a sample of approx. 0,5 litre of liquid is needed. The
transfer of the liquid from the sampling bottle to a laboratory bottle occurs by
overpressuring the upper chamber of the sampler with a pump.
- Easy
installation on 2 Inch vapour control valves with quick connect coupling
-
The sampling height can be read on the graduated tape
- After sampling, the
liquid can be transferred into a laboratory bottle by opening the transfer valve
and actuating the pressure pump.
- The sampler is delivered with a zone
sampling bottle if not otherwise specified. Additional spot, bottom or running -
sampling bottles are available
- Its very light construction facilitates its
transport and handling
- Very easy to clean
- Low investment cost
-
Fully compatible with non corrosive and corrosive liquids
- Special design
for use on 2 Inch Compact Valves exclusively
Technical specifications :
Maximal tank overpressure : 0,3 bar, 4,4 psi
Unit height : 800 mm
Weight : 5.3 kg
Tape length : 30m, 100ft
Capacity of zone sampling
bottles : ~0,5 l
HH10/Sampler GTX CHEM 30m/100ft
With FFKM gaskets
for operation in all kind of liquids
Materials : Stainless Steel AISI 316,
PTFE, PVDF, FFKM
For connection on 2 Inch Compact valves
exclusively
No gas release during sampling
Representative sample
For low or high viscous liquids
产品质保:质保一年,终身售后服务
@2012 www.midwestz3.com,License; 版权声明 后台管理|在线客服QQ