产品展示
详细说明
N-212(50μm) 602*1102mm
产品规格 型号N-212 厚度51(μm) 克重102.0(g/m2)
性能指extClass' contenteditable='false' tabind='-1'>标 Performance Ind
N-3010 N-3015 N-211/212
物理性能
Physical Properti
技术指extClass' contenteditable='false' tabind='-1'>标
Technical Ind
测试方法
Tt Method
拉伸测试 Tensile Tt
(23°C, 50% RH)
纵向
MD
横向
TD
纵向
MD
横向
TD
/
拉伸强度 Tensile
trength(MPa)
45 38 40 35 30 AextClass' contenteditable='false' tabind='-1'>TM D 882
弹性模量 Tensile
Modulu(MPa)
480 400 400 350 400 AextClass' contenteditable='false' tabind='-1'>TM D 882
断裂伸长率
Elongation at
break(%)
175 150 190 170 150/180 AextClass' contenteditable='false' tabind='-1'>TM D 882
比重 pecific Gravity 1.97 1.97 1.98 —
其它性能
Other properti
技术指extClass' contenteditable='false' tabind='-1'>标
Technical Ind
测试方法
Tt Method
电导率 2
Conductivity(/cm)
0.095 0.134 0.100
GB/T
20042.3-2009
透过率
3Hydrogen
Crossover(ml/min·cm
2)
<0.010 <0.010 <0.015/0.010
GB/T
20042.3-2009
透氢电流密度 4
Hydrogen Crossover
Current(mA/cm2)
<2.0 <2.0 / 科润 THINKE
水解性能
Hydrolytic Properti
技术指extClass' contenteditable='false' tabind='-1'>标
Ind Parameters
测试方法
Tt Method
含水量 5
Water Content(%)
10.0±3.0 10.0±3.0 5.0±3.0 AextClass' contenteditable='false' tabind='-1'>TM D570
WWW.THINKRE.CN
吸水率 6
Water Uptake(%)
50.0±5.0 50.0±5.0 50.0±5.0 AextClass' contenteditable='false' tabind='-1'>TM D570
厚度溶胀率
Thickns Change
从23°C, 50% RH到 23°C 浸泡
from 50% RH, 23°C to water soaked,23°C
10 15 10
AextClass' contenteditable='false' tabind='-1'>TM D756
厚度溶胀率
Thickns Change
从 23°C, 50% RH 到 100°C 浸
泡
from 50% RH, 23°C to water soaked,100°C
30 40 30 AextClass' contenteditable='false' tabind='-1'>TM D756
纵向
MD
横向
TD
纵向
MD
横向
TD
/
线性溶胀率
Linear pansion
从23°C, 50% RH到 23°C 浸泡
from 50% RH, 23°C to water soaked,23°C
3 4 3 5 4 AextClass' contenteditable='false' tabind='-1'>TM D756
线性溶胀率
Linear pansion
从23°C, 50% RH到 23°C 浸泡
from 50% RH, 23°C to water soaked,100°C
5 2 10 5 20 AextClass' contenteditable='false' tabind='-1'>TM D756
1膜测试前在 23°C, 50% RH 环境extClass' contenteditable='false' tabind='-1'>下至少放置 24h。
Measurements taken with membrane conditioned to 23°C, 50% RH. 2电导率测试是 23°C, RH extClass' contenteditable='false' tabind='-1'>下进行。
Conductivity measurements a 23 °C, RH. 3透过率测试是在 23°C, RH extClass' contenteditable='false' tabind='-1'>下进行的。
Hydrogen crossover measured at 23 °C, RH. 4透氢电流测试:将膜组装做成 MEA,在 80°C 完水和状态extClass' contenteditable='false' tabind='-1'>下进行的。
Hydrogen crossover Current measured in MEA on H2, 80°C, fully humidified gas. 5膜在 23°C, 50% RH 环境extClass' contenteditable='false' tabind='-1'>下相对于干膜的含水量。
Water content of membrane conditioned to 23 °C and 50% RH (dry weight basis). 6膜在 100°C, 水煮 1h 后相对于干膜的吸水率。
Water uptake from dry membrane to conditioned in water at 100 °C for 1 hour (dry weight basis).
WWW.THINKRE.CN
NEPEM-11 系列膜产品说明
重量 1KG内